Air Conditioner Water Leakage And Related Issues

2023-06-06



1.1What is the reason for the water leakage of the air conditioner?

There are many possibilities; 
(1) the installation is not stable; 
(2) the drainage pipe is bent or flattened; 
(3) the direction of the drainage pipe is wrong, and the water outlet level is higher than the water connection pipe level of the machine; 
(4) the drainage The pipe joint part is not strictly separated; 
(5) The water in the water tray is poured out due to the rapid and violent movement of the machine guide; 
(6) The water in the sink is poured out when the dumper is moved from the high-rise platform to the bottom floor 
(7) The drainage hole of the water tray is blocked (it will appear in the machine that has been used for a period of time);  
(8) After violent handling and impact, the water tray may be displaced or damaged (the chassis is damaged; damaged)

1.2 Why do some outdoor units of the same type of air conditioner have more drainage and some have less?

A.The environment where the air conditioner is installed is different, for example, the orientation is different. When the sun shines directly, part of the condensed water has evaporated, so there is less water.
B. The humidity of the installation location is different, and the one with high humidity will have more water; for example, places such as the basement will have high humidity and relatively more drainage.
C. The insulation effect is different, and the water with insulation layer is less.
1.5 Why do the wind guide blades sometimes drip?
When the air humidity is relatively high, if the cooling temperature is relatively low, and it is in a low wind state, condensed water will form on the air guide blades. At this time, it can be eliminated by increasing the cooling temperature and setting it to a high wind state.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy