SZ Type Water Ring Vacuum Pump

SZ type water ring vacuum pump

Product Introduction

SZ water ring vacuum pump and compressor are used to pump or compress air and other non-corrosive and water-insoluble gases to form vacuum and pressure in a closed container. However, the inhaled gas is allowed to be mixed with a small amount of liquid. Since the compression of the gas is isothermal during the working process, it is not easy to cause danger when compressing and sucking flammable and explosive gases, so it is more widely used.

ProductParameter (Specification)

Product Feature And Application

· Regularly check the operation and lubrication of the ball bearings.

·Clean the bearing at least once a year and replace all the lubricating oil.

·The temperature of rolling bearings in normal operation is 15℃-20℃ higher than the ambient temperature, and the maximum temperature is not allowed to exceed 55℃-60℃. Bearings in normal operation should be filled with oil 3-4 times a year.

The packing should be compressed regularly. If the packing cannot guarantee the required tightness due to wear and tear, the packing should be replaced. The packing should not be compressed too tightly. The normally compressed packing allows water to leak out, and the amount should not be too much. , Application of oil-impregnated asbestos rope as filler.

Product Details

All copper motor. Using all-copper coils and all-copper motors with cold-rolled silicon steel sheets, it is not easy to burn the machine and will not use refurbished old motors.

Can be equipped with human bearings, Harbin bearings, Wafangdian bearings, NSK SKF imported bearings

High-precision rotor, precision machining and casting, smooth rotor operation, anti-rust and moisture-proof surface treatment.

FAQ:

Q:Where is your factory located? How can I visit there? 
A:Our factory is located inNanyang City,Henan Province, China.You can fly toZhengzhou airport directly, and we will be there for picking you up. All our clients from home or abroad, are warmly welcome you to visit us! 

Q: What is the warranty time of your products?
A: The warranty time is 12months from the date of the commissioning. 

Q:How does your factory do regarding quality control? 
A:"Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2008 authentication.