T35 Axial Flow Fan
  • T35 Axial Flow Fan - 0 T35 Axial Flow Fan - 0
  • T35 Axial Flow Fan - 1 T35 Axial Flow Fan - 1
  • T35 Axial Flow Fan - 2 T35 Axial Flow Fan - 2
  • T35 Axial Flow Fan - 3 T35 Axial Flow Fan - 3
  • T35 Axial Flow Fan - 4 T35 Axial Flow Fan - 4
  • T35 Axial Flow Fan - 5 T35 Axial Flow Fan - 5

T35 Axial Flow Fan

Henan Shuangxin Fire and Environmental Protection Equipment Manufacturing Co.,Ltd is a leading T35 axial flow fan manufacturer and supplier in China. We have been specialized in fog cannon dust control for many years. Our products have and high quality with a good price advantage and cover most of the European and American markets. We look forward to develop more market with sincere partners.

Send Inquiry

Product Description

T35 axial flow fan

 

Product Introduction


T35-11 axial fan is mainly used for ventilation and heat dissipation in general factories and warehouses. According to the machine number, the fan is divided into 30 specifications from 280 to 1120mm. The number of fan blades in each specification is 4, and the blade angles are 15°, 20°, 25°, 30° and 35°. The parameters range is wide, the air volume is 800~67000m3/h, and the wind pressure is 40~470Pa. The fan can be wall mounted or pipe mounted.

 

Product Parameter


Product Name: T35 axial fan

Type number: According to the machine number 280~1120mm a total of 30 specifications

Wind capacity: 800~67000m3/h

Wind pressure: 40~470Pa


Product Feature And Application


T35 axial flow fan is based on similar products abroad, through the model test study, determine the fan blade shape, using the cylinder hub structure, at the same time, the motor modification design, reduce the flow loss; Therefore, the efficiency of the fan outlet is increased to 77% according to the circular area and 89.5% according to the outlet ring area. The noise is 3.6dB lower than that of A, and the strength at the blade root is enhanced to avoid the blade fracture phenomenon.

 

Application:


T35 axis ventilation machine is mainly used for ventilation or strengthening heating heat dissipation in general factories, warehouses, offices, residential and other occasions;

 

If the casing is removed, it can also be used as a free fan. It can also be installed in series at intervals in the longer exhaust pipe to improve the wind pressure in the pipe.

 

 

Product Details


Cold-rolled sheet with high hardness, not easy to deform, fall off, large air volume, low noise and no ash

 

High power and low consumption. Smooth operation, improve efficiency at the same time. Effective noise reduction, strengthen the fan blades, Sturdy material, not easy to damage.

 

Hot rolled steel plate material. The fan flange is formed by a single pressure spinning machine, the process is not deformed, the sealing is good, the precision is high, and the appearance is beautiful.

 

Low foot stability. Fixed design Triangular mechanics fixed to reduce the vibration generated when the motor is running

 

Copper wire motor.

Reasonable motor structure, good heat dissipation performance, copper core coil, longer service life.

 

Fan installation and precautions

 

5.1 Before installation, it is necessary to check in detail whether the fan is damaged and deformed due to packaging and transportation. If it is damaged and deformed, it can be installed only after repair.

 

5.2. During installation, attention should be paid to check whether the connecting parts are loose. The clearance between the blades and the air duct should be uniform, and no scraping should be allowed.

 

5.3 The weight of the pipe connected to the air outlet should not be borne by the air duct of the fan, and additional support should be added during installation.

 

5.4. The air collector must be installed at the air inlet end of the ventilator. If conditions permit, it is best to install protective barbed wire.

 

5.5. The fan base must be naturally connected with the foundation plane. Do not knock the base for forced connection to prevent the deformation of the base.

 

5.6. After installation, test must be carried out first. After normal operation, it can be formally used.

 

FAQ:

Q:Where is your factory located? How can I visit there? 
A:Our factory is located in Nanyang City, Henan Province, China. You can fly to Zhengzhou airport directly, and we will be there for picking you up. All our clients from home or abroad, are warmly welcome you to visit us! 


Q: What is the warranty time of your products?
A: The warranty time is 12months from the date of the commissioning. All quick-wear spare parts will be provided for free within the warranty period. After the warranty, we also can ensure that you can buy any necessary spare parts with favorable price within 5 years.


Q:How does your factory do regarding quality control? 
A:"Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2008 authentication.

 

 

 

Hot Tags: T35 Axial Flow Fan, Manufacturers, Factory, China, Made in China, Cheap, Durable, Quality, Easy-maintainable, 1 Years Warranty

Send Inquiry

Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy