The knowledge of fog cannon machine in detail

Fog cannon machine is based on the principle of wind. It uses a high-pressure pump and a fine atomizing nozzle to atomize the water, and then uses the air volume and pressure of the fan to transmit the atomized water mist over a long distance, so that the water mist can reach a long distance. It can be over large areas, spewing out tiny artificial fog particles that float in the air for a while. The length of the mist produced by a single nozzle can be 3-5 meters, the width of the fog can be 1-2 meters, and the water mist and dust can condense. After landing, to achieve the purpose of dust reduction. At present, working dust and local dust is a difficult problem in dust control in many open storage yards and workplaces. In the past, many companies used water spraying treatment, but the small coverage area and large water consumption problems make the treatment effect of water spraying is not ideal. The spray spray from the fog gun machine and the PM2.5 and PM10 dust particles suspended in the air adsorption, aggregation and sedimentation, to reduce pollutants, reduce the purpose of haze, water consumption for the traditional sprinkler nozzle 2 ~ 3 into, and its spray area is more than 20 times higher. According to relevant data, when the fog cannon machine is put into dust control, the PM10 in the air is reduced by 10%-20%, and the PM2.5 is reduced by 3%-5%.