English
Español 
Português 
русский 
Français 
日本語 
Deutsch 
tiếng Việt 
Italiano 
Nederlands 
ภาษาไทย 
Polski 
한국어 
Svenska 
magyar 
Malay 
বাংলা ভাষার 
Dansk 
Suomi 
हिन्दी 
Pilipino 
Türkçe 
Gaeilge 
العربية 
Indonesia 
Norsk 
تمل 
český 
ελληνικά 
український 
Javanese 
فارسی 
தமிழ் 
తెలుగు 
नेपाली 
Burmese 
български 
ລາວ 
Latine 
Қазақша 
Euskal 
Azərbaycan 
Slovenský jazyk 
Македонски 
Lietuvos 
Eesti Keel 
Română 
Slovenski 
मराठी 
Srpski језик
Routine maintenance and care of the fog cannon
2023-02-27
Automatic industrial-grade fog cannon , because of its installation form multi-selective, dexterous and lightweight, can be fixed accurate spraying, long range power, fully automatic control and other characteristics, is widely used It is widely used in many industries.
First, application areas of the fog cannon.
1.Dust removal for environmental protection. This is the main use of the fog cannon , whether indoor or outdoor, as long as there is a large amount of dust generated by the site need fog cannon . For example: closed coal shed, open pit mining, construction sites.
2.Environmental cooling. The need for cooling places, such as: specific plant workshops, cultural squares, farms, amusement parks, etc.
3.Pesticide spraying. Applicable places are: forest de-worming, garbage dump de-worming, livestock farm de-worming, etc.
4.Improve the smell. Applicable places are: garbage dump, lakeside where algae breed in summer, farms, etc.
The working environment of the fog cannon is generally harsh. The equipment will be covered by a thick layer of dust in ten and a half days of use. After using it for a long time, there may be such and such a failure, and preventing improper environment will also affect the service life due to corrosion or rusting. So fog cannon in the daily use of the process, to frequent maintenance, inspection, maintenance.
Second, fog cannon machine maintenance precautions.
To reduce the chances of equipment failure and extend the service life. The maintenance and daily inspection of the fog cannon machine can be carried out according to the following matters.
1.Check whether the v-belt is slack. If there is slack, adjust it according to the fog cannon machine use manual.
2.Often check whether the lubricant and plunger grease in the plunger pump is sufficient, otherwise it should be refueled.
3.Check whether the spray pipe is broken and whether the spray pipe joint gasket is broken. If the spray pipe is broken or the joint gasket is damaged, replace it.
4.Give lubrication to each lubrication point, keep it clean and remove sludge in time.
5.It is strictly forbidden to dismantle the electrical appliances, magnetic collision spray nozzle, water level below the height of the pump, and dismantling by yourself.
6.When the ambient temperature is lower than 0℃, attention should be paid to the circulating water system to prevent freezing and cracking of the body.
7.Sand and debris are strictly prohibited from entering the water tank to avoid blocking the pipes, nozzles or damage to the piston pump. In case of nozzle blockage or leakage, the pump should be shut down to clean up and exclude.
8.After the operation of the dust sprayer, the machine must be drained of water, especially in the low temperature, easy to freeze areas. When not in use, the machine must be thoroughly drained of water to avoid freezing and cracking equipment and pipes.
9.Check the condition of the nozzle, such as whether there is wear and tear.
10.Check whether the machine has water leakage.
11.Check whether the pressure gauge, control valves and other accessories are running normally and are not damaged.
12.After use, drain the pipeline and the water in the equipment, spin loose control valve regulating handle.
13.Select clean water as much as possible to avoid blocking the nozzle leading to failure.
14.When the wind is too strong, do not spray, so as not to cause water mist back.
15.Prohibit the use of strong acids, strong alkalis and other special working fluids.
16.If the fog cannon to be placed for a long time, in addition to cleaning work, but also the nozzle, belt and other removable parts removed and rinsed clean. With the body of the machine in a cool dry place, avoid direct sunlight, away from drugs, fertilizers and other corrosive substances. If there are rubber products, they need to be hung to the wall to avoid extrusion damage.
First, application areas of the fog cannon.
1.Dust removal for environmental protection. This is the main use of the fog cannon , whether indoor or outdoor, as long as there is a large amount of dust generated by the site need fog cannon . For example: closed coal shed, open pit mining, construction sites.
2.Environmental cooling. The need for cooling places, such as: specific plant workshops, cultural squares, farms, amusement parks, etc.
3.Pesticide spraying. Applicable places are: forest de-worming, garbage dump de-worming, livestock farm de-worming, etc.
4.Improve the smell. Applicable places are: garbage dump, lakeside where algae breed in summer, farms, etc.
The working environment of the fog cannon is generally harsh. The equipment will be covered by a thick layer of dust in ten and a half days of use. After using it for a long time, there may be such and such a failure, and preventing improper environment will also affect the service life due to corrosion or rusting. So fog cannon in the daily use of the process, to frequent maintenance, inspection, maintenance.
Second, fog cannon machine maintenance precautions.
To reduce the chances of equipment failure and extend the service life. The maintenance and daily inspection of the fog cannon machine can be carried out according to the following matters.
1.Check whether the v-belt is slack. If there is slack, adjust it according to the fog cannon machine use manual.
2.Often check whether the lubricant and plunger grease in the plunger pump is sufficient, otherwise it should be refueled.
3.Check whether the spray pipe is broken and whether the spray pipe joint gasket is broken. If the spray pipe is broken or the joint gasket is damaged, replace it.
4.Give lubrication to each lubrication point, keep it clean and remove sludge in time.
5.It is strictly forbidden to dismantle the electrical appliances, magnetic collision spray nozzle, water level below the height of the pump, and dismantling by yourself.
6.When the ambient temperature is lower than 0℃, attention should be paid to the circulating water system to prevent freezing and cracking of the body.
7.Sand and debris are strictly prohibited from entering the water tank to avoid blocking the pipes, nozzles or damage to the piston pump. In case of nozzle blockage or leakage, the pump should be shut down to clean up and exclude.
8.After the operation of the dust sprayer, the machine must be drained of water, especially in the low temperature, easy to freeze areas. When not in use, the machine must be thoroughly drained of water to avoid freezing and cracking equipment and pipes.
9.Check the condition of the nozzle, such as whether there is wear and tear.
10.Check whether the machine has water leakage.
11.Check whether the pressure gauge, control valves and other accessories are running normally and are not damaged.
12.After use, drain the pipeline and the water in the equipment, spin loose control valve regulating handle.
13.Select clean water as much as possible to avoid blocking the nozzle leading to failure.
14.When the wind is too strong, do not spray, so as not to cause water mist back.
15.Prohibit the use of strong acids, strong alkalis and other special working fluids.
16.If the fog cannon to be placed for a long time, in addition to cleaning work, but also the nozzle, belt and other removable parts removed and rinsed clean. With the body of the machine in a cool dry place, avoid direct sunlight, away from drugs, fertilizers and other corrosive substances. If there are rubber products, they need to be hung to the wall to avoid extrusion damage.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy