What are the product categories of high-efficiency air filters?

Non partition high-efficiency filter

The filter without separator uses Hot-melt adhesive instead of aluminum foil with separator filter to separate the filter material. Due to the absence of partitions, a 50mm thick non partition filter can achieve the performance of a 150mm thick partition filter. The HEPA with a 90mm thick outer frame can achieve an air volume of 1.3 times that of the SPAN 150mm thick standard resistance type with a partition and twice that of the SPAN 150mm thick standard resistance type with the same filtration area and efficiency. It can meet the stringent demands of various space, weight, and energy consumption for air purification today.

Deep-pleat high efficiency filter

The high efficiency filter with partition is made of Microfiber as the filter material, high-quality Kraft paper by hot rolling, or offset paper and aluminum platinum as the separation plate, combined with wood frame or aluminum alloy frame glue. It has the advantages of high filtration efficiency, low resistance and large air volume. High efficiency filters with baffles usually use Coated paper with double-sided adhesive as the separator to prevent the separator from shrinking under the influence of hot, cold, dry and wet conditions, thus emitting particles. Suitable for low-level non unidirectional flow projects and various purification equipment and clean workshops. Among the partition filters, aluminum partition filters are mainly used in high-temperature or high humidity environments, while paper partition filters are used in ordinary clean environments. The partition has a relatively large air volume and can be used for high-temperature filtration.

V-shaped pleated filter

Used in general ventilation systems, it has the characteristics of large filtration area, low resistance, and long service life. It can be used as a pre filter for high-efficiency filters, thereby effectively extending the service life of high-efficiency filters.

Liquid tank type high-efficiency filter

The liquid tank type high-efficiency air filter, also known as the liquid tank filter, is mainly used at the sealed high-efficiency air supply outlet of the liquid tank at the end of the clean room, with a filtration level of H14-U15.

HEPA

High efficiency filter, this product is designed and developed specifically for high airflow requirements under low resistance conditions.