VE series single-input single-output off-grid industrial frequency inverter. Capacity from 1KVA-5KVA, wall-mounted ultra-thin structure. Adopting the design of ring cow transformer, the industrial frequency inverter works to reverse the DC power into industrial frequency low voltage AC power. Through the I.F. transformer, it is stepped up to 220V, 50HZ AC for load use, ensuring high reliability. Optional PWMMPPT, with anti-reverse connection and output short circuit protection.
Model |
VE0512R |
AC input voltage |
220VAC( standard) |
Input voltage range |
154-275VAC士5V (Nor Model) |
Input frequency |
50/60Hz土5% |
Out put power |
300W |
AC model output Voltage |
With AVR function 220V士 10% |
AC model outout frequency |
The output frequency under the mains is the same as the input frequency |
Battery model output voltage |
220VAC士3% |
Battery model output frequency |
50HZ or 60HZ士1% |
Battery model output wave |
Pure sine wave |
Battery type |
External lead- acid battery or water battery |
Battery voltage |
12VDC |
Battery charging voltage |
13. 75VDC |
Maximum PV array power |
12V: 400W 24V: 800W |
Solar input voltage range |
2V: PWM 15V-30VDC 24V: PWM 30V-6OVDC |
Maximum PV Display Open Circuit Voltage |
12V: PWM 30VDC 24V: PWM 60VDC |
Maximum solar charging current |
30A |
Maximum AC Charge Current |
8A |
Battery charging voltage range |
154-275VAC士5V |
Transfer time |
≤10ms |
Load peak ratio |
(MAX)3:1 |
Protective function |
Under the mains: input overcurrent fuse |
Under inverter: overload protection, short circuit protection, low voltage protection, (with battery anti-reverse connection board) . |
|
Status Display |
You can view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, load current and other parameters by turning the page keys. |
Voice prompt |
Low battery protection buzzer long beep |
Low battery buzzer beeps every second |
|
Overload buzzer beeps |
|
When the overload is less than 130%, the buzzer will sound every second, and the output will be turned off after 30S. When the overload is greater than 150%, the output will be turned off after 300mS. |
|
Machine fault buzzer beeps |
|
Operating temperature |
0℃~40℃ |
Storage temperature |
-15℃~45℃ |
Relative temperature |
-10℃~90℃no condensation |
Noise |
0~40℃ |
Machine size (L*W*H) mm |
325*263*123M |
Features:
1. Pure sine wave output.
2. Can support the use of WiFi/ GPRS.
3. MPPT Efficiency max 98%.
4. Optional MPPT/PWM solar charge controller 30A -120A.
5. DC start & automatic self-diagnosticfunction.
6. Automatically send signal to start generator.
7. High efficiency design for optimized battery performance.
8. Selectable charging current based on applications .
9. Ac Start-up voltage Auto Restart Voltage.
10. lead acid battery /Lithium battery.
Application scope: household appliances, electric tools, office and portable equipment, vehicles and yachts, etc
MPPT & PWM
Jack details
Can be applied to different scenarios
Installation site of foreign products