The mixed flow fan is a fan between the axial flow fan and the centrifugal fan. The impeller of the diagonal flow fan makes the air perform both centrifugal and axial movements. The movement of the air in the shell is a mixture of axial flow and centrifugal movement.
No. |
Rotating speed |
Wind Volume |
Pressure |
Motor No. |
Power |
Noise |
Weight |
4A |
1450 |
3984 |
164 |
Y712-4 |
0.37 |
71 |
34 |
3785 |
187 |
||||||
3320 |
220 |
||||||
2988 |
235 |
||||||
2689 |
242 |
The commonly used materials for making diagonal flow fans are: steel, glass fiber reinforced plastic, aluminum, etc.
The main components of the diagonal flow fan are: motor, impeller, outer cylinder, inner cylinder, guide vanes, feet, etc.
The diagonal flow fan can be used for general ventilation, and the conditions of use are as follows:
1. Application site: As the indoor ventilation of general factories and buildings, it can be used as both input gas and exhaust gas.
2. Type of conveying gas: air and other non-flammable gas, harmless to human body and non-corrosive gas to steel.
3. Impurities in the gas: Please do not allow viscous substances in the gas, and the dust and hard particles contained in the gas are not more than 150mg/m3.
Cold-rolled sheet with high hardness, not easy to deform, fall off, large air volume, low noise and no ash
High power and low consumption. Smooth operation, improve efficiency at the same time. Effective noise reduction, strengthen the fan blades, Sturdy material, not easy to damage.
Hot rolled steel plate material. The fan flange is formed by a single pressure spinning machine, the process is not deformed, the sealing is good, the precision is high, and the appearance is beautiful.
Low foot stability. Fixed design Triangular mechanics fixed to reduce the vibration generated when the motor is running
Copper wire motor.
Reasonable motor structure, good heat dissipation performance, copper core coil, longer service life.
Q:How does your factory do regarding quality control?
A:"Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2008 authentication.
Q: How long is your delivery time?
A: It is according to the model and quantity. Generally it is 3-5 days if the machines are in stock.
It will be 15-30 days if you want to customize the machines.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.